Migrating a DEFINITY Server R to an S8700-Series Media Server
750 Upgrading, Migrating, and Converting Media Servers and Gateways
CAUTION:
Be sure to do this step
before freezing translations.
Check the Dial Plan screen
(or Dial Plan Analysis
Table screen depending on
the release) for 0 assigned
as attd.
If none, check the Attendant Console screens for any
buttons with attd-qcalls or attd-qtime btns. Remove
these if 0 is not assigned as attd.
Replace any TN775/B/C
maintenance circuit packs.
Replace the TN775/B/C maintenance circuit pack
with TN775D circuit packs in any EPN that contains
an IPSI.
About 2 weeks before the
migration, freeze the
translations.
● Collect the
translations by tape
or Magneto Optical
cartridge.
If the existing system does
not have a magneto optical
drive or if the MOST (From
a magneto optical disk on
page 743) will not be used,
send the translation media
to the STS.
For more information on where and how to send the
translations, contact the STS scheduling desk at
720-444-9418.
STS then updates the translations to the latest
version. This process can take 2 weeks. STS returns
the translation reports and translation files to the
project manager by e-mail who sends them to the
technical support representative.
Verify that a copy of the existing translations exists so
that you can reenter the translations later.
Verify that you have the
appropriate logins and
passwords to access the
media servers and server
complex components.
When you finish installing the authentication file,
Communication Manager has a password for all Avaya
logins, including craft. This password is unique to the
media server of the customer. You can use the
password the next time that you log in as craft, if you
access the media server through the Services port.
You do not need an ASG challenge/response to log in
this way, even though every other means of craft
access still requires an ASG challenge/response.
This unique craft password remains valid until the
password is changed by installing a new
authentication file.
Copy the translation file
from STS to a directory on
the Services laptop.
File size is usually in the range of 1-4 megabytes.
9
Task Description
4 of 4
To Next Page
Loading...
