About server port connections
Installing and Configuring the Avaya S8700-Series Server January 2008
17
Figure 3: Duplication and control network cabling for software duplication (S8730)
Note:
Note: These are typical Ethernet port assignments. The customer might specify
different assignments for Eth2, Eth3, and Eth4.
Figure notes:
1. Eth0 — Server Duplication Link - duplication crossover cable
2. Eth2 — To an Ethernet switch and/or the corporate LAN for control network A (CNA)
3. Eth3 — To an Ethernet switch and/or the corporate LAN for control network B (CNB)
4. Eth4 — To the corporate LAN if the control networks are dedicated.
1
2
UID
ILO 2
PCIe 1PCIe 2
3
4
5
1
2
UID
ILO 2
PCIe 1PCIe 2
3
4
5
1
2
hw8730s2 LAO 081607
1
3
2
4
To Next Page
Loading...
