Avaya S8730 - Page 18

Chapter 1: Introduction
18 Installing and Configuring the Avaya S8700-Series Server January 2008
Figure 4: Duplication and control network cabling for software duplication (S8720/S8710)
Note:
Note: These are typical Ethernet port assignments. The customer might specify
different assignments for Eth2, Eth3, and Eth4.
Figure notes:
1. Eth0 — Server Duplication Link
2. Eth2 — To an Ethernet switch and/or the corporate LAN for control network A (CNA)
3. Eth3 — To an Ethernet switch and/or the corporate LAN for control network B (CNB)
4. Eth4 — To the corporate LAN if the control networks are dedicated.
2
3
iLO
VDCI
1
2
3
133 MGz
100 MGz
100 MGz
UID
2 1
2
3
iLO
VDCI
1
2
3
133 MGz
100 MGz
100 MGz
UID
2 1
1
2
h3df87s2 LAO 122206
1
4
3
2