Chapter 5: IP interface translations
52 Installing and Configuring the Avaya S8700-Series Server January 2008
Adding media gateways
Note:
Note: If system translations have been loaded on the server, media gateways do not
need to be added to administer the IPSI.
1. Type add cabinet n and press Enter, where n is the cabinet number, for each stack of
media gateways that is controlled by one TN2312BP IPSI circuit pack.
A cabinet is defined as a group of up to five G650 Media Gateways that are mounted in a
rack and TDM-connected.
2. Fill in the carrier location letter and the carrier type for each media gateway in the cabinet.
add cabinet 1 Page 1 of 1
CABINET
CABINET DESCRIPTION
Cabinet: 1
Cabinet Layout: G650-rack-mount-stack
Cabinet Type: expansion-portnetwork
Number of Portnetworks: 1
Survivable Remote EPN? n
Location: 1 IP Network Region:1
Cabinet Holdover: A-carrier-only
Room: Floor: Building:
CARRIER DESCRIPTION
Carrier Carrier Type Number
E not-used PN 09
D not-used PN 09
C not-used PN 09
B G650-port PN 09
A G650-port PN 09
To Next Page
Loading...
