Chapter 6: IP interface configuration
66 Installing and Configuring the Avaya S8700-Series Server January 2008
2. For duplicated IPSIs, enable IPSI duplication before you enable IPSI control. See Enabling
IPSI duplication (duplicated control network only) on page 55. On the SAT, type change
system-parameters ipserver-interface and press Enter.
3. Ensure the IPSI Control of Port Networks: field is set to enabled.
4. Submit the screen to save the changes.
Verifying the license status
On the Maintenance Web Interface, under Security, click License File and verify that the
license mode is now normal.
To Next Page
Loading...
