Avaya XT Series - Setting the System Name, Language, and Call Method

Figure 49: Access the Quick Setup Wizard
The quick setup wizard guides you through many basic configuration tasks.
Related links
Manually setting up the XT Series on page 105
Setting the System Name, Language, and Call Method on page 111
Adjusting the Image Position on page 112
Configuring Basic Network Settings on page 113
Configuring Basic Gatekeeper Settings on page 114
Configuring Basic SIP Settings on page 115
Installing Avaya Room System XT Control to Use Keyboard and Mouse (Avaya XTE240) on
page 116
Setting Date and Time on page 118
Setting the Time Zone on page 119
Configuring the Screen Saver to Start Automatically on page 121
Setting the System Name, Language, and Call Method
About this task
Note:
This step is for the manual configuration of your XT Series. If you have chosen the auto-
provisioning (cloud) method of configuration, this step is not available.
The first screen in the Quick Setup wizard enables you to define the name of your Avaya Room
System XT Series, the country, the menu language, and the protocol the system uses for calls.
The unit's name is displayed on the system's title bar and to other meeting participants. For
example, Hong-Kong, 9th-Floor-Room, or NY-Office. There is also a unicode system name to
Configuring Basic Settings with the Quick Setup Wizard
August 2020 Deployment Guide for Avaya XT Series 111
Comments on this document? infodev@avaya.com