Figure 90: Presentation
2. Define the Gallery Layout field.
Table 49: Configuring gallery layouts
Field Name Description
Gallery Layout
(Ignored when
receiving web
collaboration)
• Automatic: The display depends on the number of monitors that are
connected when the XT Series joins the meeting. If one monitor is
connected, XT Series displays gallery layout. If two monitors are
connected, XT Series displays the participants on one screen and the
presentation on the other screen. This is the default value.
• Always: The display is always gallery layout.
• Never: The display is never gallery layout.
3. From the web interface only, click Save.
Configuring Enhanced Lecture Mode
About this task
You can configure the XT Series to display the Continuous Presence (CP) of the other participants
to the lecturer, while the other participants see the lecturer only. Alternatively, you can configure
the XT Series to display both the lecturer video and the video of the previous or active speaker to
everyone, including the lecturer. In this layout, the lecturer video is displayed as a large image and
the previous or currently active speaker is displayed as a small image.
Configuring Enhanced Lecture Mode
August 2020 Deployment Guide for Avaya XT Series 191
Comments on this document? infodev@avaya.com
To Next Page
Loading...
