Avaya XT Series - Limiting or Disabling Access to Built-In MCU

Field Name Description
User Name,
Password
Enter the remote web access username (requires HTTPS to be set to
Yes).
The default username for the web interface is Admin with the password
1234.
We strongly recommend that you change the default credentials the first
time you access the XT Series remotely.
Disconnection due
to inactivity (Web
configuration page
only)
Select the duration in minutes after which the web disconnects a user who
has not performed an action during that time period.
Enable login
attempts (Web
configuration page
only)
Select to block a user after five incorrect login attempts within a ten
minute period. The user is blocked for the time specified in Login Denied
Time. The XT Series displays a message, inviting the user to retry later.
Login Denied Time
(Web configuration
page only)
Select the time period during which a user is blocked from logging in to
the web interface. This ranges from 30 minutes to 1, 2, or 4 hours.
Disable TLS 1.0/1.1 Select to enable a secure connection.
3. From the web interface only, select Save.
4. To perform remote upgrades, enable remote downloads as described in Enabling and
Securing Upgrades on page 202.
Limiting or Disabling Access to Built-in MCU
About this task
If you are using the built-in MCU, you can enable privacy settings. You can disable the MCU
completely or limit the number of participants. In addition, you can block the audio and video input
completely or you can ensure that only users with a PIN can access the audio and video.
Procedure
1. Access the MCU settings. From the XT Series web interface, select Administrator
Settings > Calls > Preferences > MCU. From the endpoint's main menu, select
Configure > Advanced > Calls > Preferences > MCU.
Securing your XT Series
August 2020 Deployment Guide for Avaya XT Series 234
Comments on this document? infodev@avaya.com