Figure 21: Small business topology using both network ports to connect to a private and public
network
Related links
Setting Up the XT Series Hardware on page 52
Connecting Monitors to the XT Series
About this task
Connect one or two monitors to the Avaya Room System XT Series to use it as a
videoconferencing endpoint, and to view the interface (menus) of the endpoint itself. Use the XT
Remote Control Unit to navigate these menus.
Each monitor is connected with an HDMI cable which can transmit both video and audio. You can
calibrate the monitor image position using the quick setup wizard (see
Adjusting the Image
Position on page 112). To configure the advanced monitor settings like the resolution of one or two
monitors and the video layouts of embedded images, see Configuring Monitors on page 121.
Figure 22: HDMI cable
Setting Up the XT Series Hardware
August 2020 Deployment Guide for Avaya XT Series 58
Comments on this document? infodev@avaya.com
To Next Page
Loading...
