of the 5-digit Server Service Code identifying the Avaya Meetings Management server,
while the 7-digit Endpoint Service Code is either empty or consists only of zeros.
If the service code is correct and matches the value from Avaya Meetings Management,
the Quick Setup Wizard displays the name of the matching XT Series configuration. If the
service code is not correct or you do not accept the pre-configuration, you can return to the
previous step and proceed with a manual configuration. For more information, see
Configuring Basic Settings with the Quick Setup Wizard on page 110.
7. Click Next.
The XT Series endpoint is configured and the Avaya Equinox Management Mode is set
to Cloud.
Result
If you pre-provision the endpoint and enter a full service code, a blue clock is displayed in the
Avaya Meetings Management list, indicating that the XT Series is ready to be provisioned but the
code has not been inserted yet. Once the provisioning is completed, the icon is replaced by the
standard icon.
If you post-provision the endpoint and enter a partial service code, a red clock is displayed in the
Avaya Meetings Management list. This is an alert for the Avaya Meetings Management
administrator to indicate that the XT Series is ready to be configured.
Connecting an XT Series outside the enterprise for the
purposes of auto-provisioning
You can use an Avaya Meetings Management server that is located inside an enterprise to
provision an XT Series endpoint that is located outside of the enterprise. In order to enable this
functionality, you must configure an Avaya Aura
®
Session Border Controller (Avaya SBCE) as a
reverse proxy with a publicly accessible (external) URL and a web socket connection from the XT
Series to the Avaya Meetings Management server.
The procedures here in the Avaya Room System XT Series documentation summarize the Avaya
SBCE configuration steps. For the complete procedures regarding the Avaya SBCE, see the
Avaya SBCE documentation, which is available on
https://support.avaya.com/.
Related links
Configuring a reverse proxy profile for Avaya Meetings Management on page 94
Configuring a reverse proxy profile for Avaya Meetings
Management
Before you begin
Set up the Avaya SBCE using the procedures described in the Avaya SBCE documentation.
Automatically provisioning the XT Series
August 2020 Deployment Guide for Avaya XT Series 94
Comments on this document? infodev@avaya.com