Avaya XT Series - Chapter 6: Using Easy Start to Setup up the XT Series; Enabling Auto-Configuration Service Discovery

To Next Page

To Previous Page

Chapter 6: Using easy start to setup up the

XT Series

If you have a deployment of Avaya Aura

and Avaya Meetings Server in your network or have

subscribed to the Avaya Equinox

Meetings Online cloud service, you can easily configure the

settings for your new endpoint. Using the Easy to Start feature, you can type your authentication

credentials in the Quick Setup Wizard to retrieve the configuration settings from the Avaya Meetings

Management server or the Avaya Equinox

Meetings Online server to the new XT Series endpoint.

The server then sends the settings related to SIP configurations and/or virtual room number to the

device. Also, if you use a valid company email address, the calendar for Microsoft Exchange/Office

365 is automatically enabled.

The discovery process operates as follows:

• If Avaya Aura

is present, it provides:

- The SIP configuration information for registering to Avaya Aura

- The virtual room number of the local on premises Avaya Meetings Server deployment if

available.

• If Avaya Equinox

Meetings Online is present, it provides:

- The virtual room number of the Avaya Equinox

Meetings Online cloud service if available.

In order for the Easy to Start feature to operate successfully, the Avaya Meetings Server

deployment must support auto-configuration service discovery through the DNS.

The acceptable credentials are your email address, including the company domain, or the company

domain only. You can then choose which Avaya Meetings Server or Avaya Equinox

Meetings

Online deployment you would like to join. At that point, depending on the chosen environment, you

must enter a username and password or SIP extension and password.

Other manuals for Avaya XT Series