Chapter 8: Configuring Advanced User
Settings
Important:
You can access the Avaya XT Series using a browser (Web UI) or the end point main menu
(Graphical User Interface, GUI). Not all figures in this manual show both interfaces. Some
figures show either the web UI or the end point main menu. The field and menu names on both
interfaces are almost identical.
This section explains how to configure advanced user settings to fit your preferences. For example,
you can set default call settings or recording settings, and secure your unit with PIN codes.
Related links
Setting Call Answering Preferences on page 104
Activating the Screen Saver on page 105
Enabling and Configuring Recording on page 106
Saving Meeting Snapshots (Avaya XTE240 only) on page 111
Setting PIN Codes for the Avaya XT Series on page 112
Confirming Call Disconnections on page 113
Configuring Multi-Stream Switching (MSS) video on page 114
Setting Call Answering Preferences
About this task
This procedure describes how to define system behavior for incoming calls. By default, the
endpoint notifies you of an incoming call, so you manually choose to answer it. However, you can
automatically answer calls after a certain number of rings, or automatically answer immediately.
Procedure
1. Access the call settings. From the Avaya XT Series web interface, select Basic Settings >
Call-Answer Mode > General. From the endpoint's main menu, select Configure >
Calling.
March 2021 User Guide for Avaya XT Series 104
Comments on this document? infodev@avaya.com
To Next Page
Loading...
