Avaya XT Series - Confirming Call Disconnections

Figure 48: Set PIN Code
2. Select Basic Settings to set or change the user's PIN code.
3. Enter the current PIN code. The default PIN is 1234.
4. Enter your new 4 digit PIN code, and re-enter if required.
5. From the web interface only, select Save.
Related links
Configuring Advanced User Settings on page 104
Confirming Call Disconnections
About this task
To prevent accidental disconnection from a call, you can configure the system to confirm before a
call is disconnected. By default, calls are disconnected when a participant ends the call, without
requiring a confirmation.
Procedure
1. Access the call settings. From the Avaya XT Series web interface, select Basic Settings >
Call-Answer Mode > General. From the endpoint's main menu, select Configure >
Calling.
2. Set Confirm Disconnect to Yes.
3. From the web interface only, select Save.
Related links
Configuring Advanced User Settings on page 104
Confirming Call Disconnections
March 2021 User Guide for Avaya XT Series 113
Comments on this document? infodev@avaya.com