Avaya XT Series - Configuring Multi-Stream Switching (MSS) video

Configuring Multi-Stream Switching (MSS) video
About this task
The Multi-Stream Switching (MSS) video solution uses the advanced switched video capabilities in
the Avaya Aura
®
Media Server (AMS) to distribute multiple video streams to each MSS aware
participant. The following clients and components support MSS:
• Avaya XT Series endpoints
• Avaya Workplace Client clients
• Avaya Aura
®
components
• Avaya Aura
®
Media Server
• Avaya Meetings Management
MSS is only supported for SIP calls.
You cannot enable MSS on Avaya XT Series devices with a CPU lower than 2.0.
Endpoints which do not support MSS receive active speaker's video from a video-enabled MSS
conference call. The received resolution could be low.
Only web collaboration is supported in this meeting type, so assure that it is enabled in the Avaya
XT Series.
Procedure
1. Access the MSS settings. From the XT Series web interface, select Administrator
Settings > Calls > Preferences > MSS. From the endpoint’s main menu, select
Configure > Advanced > Calls > Preferences > MSS.
Figure 49: MSS Preferences
2. Configure the settings, as described in Table 14: MSS Settings on page 115.
Configuring Advanced User Settings
March 2021 User Guide for Avaya XT Series 114
Comments on this document? infodev@avaya.com