EasyManua.ls Logo

Avaya XT Series - Configuring Basic Network Settings

Avaya XT Series
134 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2. Decide if the monitor's image needs adjusting, by verifying if the white border of the
triangles in the top left and bottom right corners are fully visible on all sides.
If the image is centered correctly, skip this procedure and select Next.
3. Press 1 to highlight the triangle in the top left corner in orange.
4. Use the arrow keys to position the image, so all sides of the white border of the triangle are
visible in the screen, then press ok/menu.
5. Press 2 to highlight the triangle in the bottom right corner in orange.
6. Adjust the image position in the same way, until all sides of the triangle border are visible,
then press ok/menu.
7. To continue with the Quick Setup Wizard, select Next (see
Configuring Basic Network
Settings on page 29).
If your monitor is 4K and your system is an Avaya XT7000 Series, graphic adjustment is
not applied.
Related links
Configuring Basic Settings with the Quick Setup Wizard on page 27
Configuring Basic Network Settings
About this task
This procedure describes how to set up the basic network settings and the IP address of the
Avaya XT Series as part of the Quick Setup Wizard. To modify advanced network settings, see
Deployment Guide for Avaya XT Series.
Procedure
1. Access the Quick Setup Wizard from the endpoint, as described in
Configuring Basic
Settings with the Quick Setup Wizard on page 27, and skip to this step.
2. Enter the following values:
Table 2: Configuring the IP address
Field Name Description
IP Address Mode or
Automatic IP Address
Determines if the IP address is dynamically allocated (using DHCP), or
if you manually designate a static IP address. You must use only static
addresses for:
Avaya XT Telepresence deployments
Units on a public network
SIP deployments where the unit is secured with a TLS certificate, if
the certificate request has been tied to a specific IP address.
IP address Enter the system static IP address. For dynamic IP addresses, this field
displays the current IP address.
Table continues…
Using the Setup Wizard to Easily Start your Avaya XT Series
March 2021 User Guide for Avaya XT Series 29
Comments on this document? infodev@avaya.com

Table of Contents

Other manuals for Avaya XT Series

Related product manuals