Connecting to a Avaya XTE240 as a Room Endpoint on page 49
Connecting to a Avaya XTE240 as a Room Endpoint
About this task
If using the Avaya XTE240 as a room endpoint, you must first connect to Avaya Room System XT
Control before using your keyboard and mouse to control the Avaya XTE240. The icon
appears, indicating that authentication is required.
If you are using the Avaya XTE240 as a personal endpoint, you only authenticate the first time you
connect your computer.
Before you begin
Connect your computer as described in Connecting a Computer to the Avaya XT Series using the
DVI port on page 77.
Procedure
1. Enter the user code displayed in your Avaya Room System XT Control page (see Figure
19: Entering the user code (example) on page 49 for an example).
Figure 19: Entering the user code (example)
2. Select Authenticate using your computer mouse.
3.
You can now control the Avaya XTE240 with your keyboard and mouse by selecting the
Avaya Room System XT Control icon in your taskbar:
For tips on getting started and using the Avaya Room System XT Control utility, see
Navigating Menus with the Keyboard and Mouse on page 47.
Related links
Navigating Menus with the Keyboard and Mouse on page 47
Using Avaya Collaboration Control
Avaya Collaboration Control is an Android/iOS app which enables you to control the following
endpoints:
With Collaboration Control you can access the calendar of the physical conference room, view
scheduled meetings, and then join directly by tapping its entry. In most endpoint models, you can
Controlling the Avaya XT Series
March 2021 User Guide for Avaya XT Series 49
Comments on this document? infodev@avaya.com
To Next Page
Loading...
