5
1.4 Hard Disk Installation
The NVR/DVR unit supports 1 SATA hard disks inside of NVR/DVR unit. Follow the illustrated
instructions below to install the hard disk:
1. Loosen all screws(2 sides and rear side)
2. Push the cover backward and lift. Please
be careful of hands.
3. Screws the hard disk on HDD holder.
4. Connect the power and STAT cable to
hard disk and place hard disk on HDD
metal plate and secured the hard disk.
5. Finally, Push the cover forward and secure
the cover.
6. You may now connect all the cables and power on the DVR unit.
To Next Page
Loading...
