156
4.6.7 Snapshot the Screen View
1. Select the channel or all channels.
2. Plug the USB pen drive to NVR/DVR unit.
3. Click Snapshot ( ) button.
4. In Snapshot dialog box, check the Save path has been detected by NVR/DVR system. If the
save path doesn’t found, click Rescan Device button to re-detect it.
5. If user wants to re-name the File name, call out the on-screen keyboard and enter the new
file name in File name column.
6. Click OK to capture and save the screen shot.
7. The captured and saved screen image can be viewed on PC.
To Next Page
Loading...
