AVer E1000 Series - Upgrade the IP Camera Module Patch

39
2.5.4.4 Upgrade the IP Camera Module Patch
To update the firmware of NVR/DVR system.
1. Plug the USB pen drive that contains the IP camera patch file.
2. In Configure/Update page, click Update button of IPCam Module.
3. In upgrade dialog box, the NVR/DVR system will detect the patch file and show the patch
file path, patch file name, and version information.
4. Click Upgrade button and an upgrade process dialog box will appear.
5. A message dialog box will appear to inform user that the upgrade process is completed.
Click OK button to finish the upgrade process.