AVer E1000 Series - Setup Storage Path for Recording Data

49
2.7.2 Setup Storage Path for Recording Data
Without storage path, the NVR/DVR system won’t be able to record.
Add a storage path for saving recording video data.
1. In Storage Setting page, click Storage tab. Select hard disk or iSCSI HDD and click
button.
2. The selected hard disk or iSCSI HDD will be added into Use for Recording HDD section.
3. To remove the hard disk or iSCSI HDD, select hard disk or iSCSI HDD in Use for
Recording HDD section and click button.