55
2.8.2 Connect the IP Camera
1. Click Setup tab > Camera Setting.
2. In Camera Information page is divided into 4 areas –Camera List, Capacity, Serach List,
and Camera Information.
-
- Camera List: Lists all camera channels. When the channel has connected IP camera, it
displays the IP Address, Protocol, Model, connection Status, FPS, Bitrate, and configure
detail button of the connected IP camera.
- Capacity: Displays the all connected IP cameras’ resolutions in Used (MP) column and
remain resolutions are display in Available (MP) column.
- Search List: To perform the auto search IP camera on your LAN network and list search
result. Also, the NVR/DVR system provides Active IP function for user to configure AVer
IP cameras series from NVR/DVR site (see also Chapter 2.8.2.1).
- Camera Information: For entering the IP camera’s parameters when connects the IP
camera.
To Next Page
Loading...
