AVer EH1000H-4 Nano - 6.2 Familiarizing the Buttons in Remote Console

96
6.2 Familiarizing the Buttons in Remote Console
Name
Function
(1) Exit
Close the Remote Console.
(2) Split Screen Mode
Select from four(4) different split screen type to playback the recorded video file of all the
camera, or one camera over the other or alongside on a single screen. If there are only 8
cameras, you won’t be able to switch to 13 and 16 split screen mode.
(3) Record
Start/stop video recording.
(4) Network
Enable/disable remote system access. This feature allows you to access DVR server from a
remote location via internet connection.
(5) Setup
Configure the Remote Console setting. (see also Chapter 6.2.1)
(6) PTZ
Call out PTZ control panel (see Chapter 6.2.2).
(7) Preview
Switch to Preview/Playback mode. This allows you to view live camera display.
(8) Playback
Switch to Playback mode. This allows you to view the recorded video file. (see also Chapter
6.3)
(9) Status Bar
Display the current date, time and hard disk free space.
(10) Camera ID
Show the number of cameras that are being viewed. When you are in single screen mode,
click the camera ID number to switch and view other camera.
(11) Snapshot
Capture and save the screen shot either in *.jpg or *.bmp format.
(12) Event Log
Display the Event logs, Operation logs, System logs, and Network logs.
(13) Auto Scan
Enable/disable channel switch cycle.
(14) Full screen
Use the entire area of the screen to only display the video. To return, Right-click the mouse
or press ESC on the keyboard.
(15) Alarm
Alert and display warning info.
(16) Audio button
Enable/disable the sound.
(17) DirectDraw
Enhance the video quality.
i
Direct Draw function supports for certain VGA card. For more information, please contact your VGA card vendor.