AVer EH1000H-4 Nano - Using the Event Search

33
2.3.3 Using the Event Search
1. Click on the video screen on where you want to search.
2. Click Event Search. The Event Search Setting dialog box would appear on the screen.
3. In the Event Search Setting dialog box, check the type of condition you want to search. Then, click
OK
to
start searching. The video search would stop at the frame that matches the condition. To keep on searching
click .
4. You may also set to search and list all the result. In the Search Duration section, set the Begin Time and
End Time. Set the Searching Interval time that system won’t list out the same events in a period of time
that user has setup. Then, click OK to start searching.
i
The DVR system will automatically set the date of End Time at 3 days later of Begin Time. If event data are
less than 3 days, the DVR system will set End Time at current date. Time of End Time is adjustable.
5. When the Event list appear, click and select the item you want to view.