AVer EH1000H-4 Nano - To Setup Camera from the Remote DVR

44
3.2.3 To Setup Camera from the Remote DVR
User can add the camera from another DVR through the network.
i
EH1004H-4 Nano/Nano
+
and EH1008H-4 Nano/Nano
+
only support first 4 channels (CH1~4) for
remote DVR’s camera.
(1) Camera Icons
Select the camera number you want to view. To enable/disable all cameras, click ALL check box.
(2) Enable
Set to enable/disable the selected camera. When there is no video source on the camera, we suggest disabling
it so that the system won’t detect it as video loss error.
(3) Input
Select the camera type as Remote DVR.
(4) Camera
- Display
Enable/disable to show the video. Even if the video of the selected camera is hidden you can still record
the video and preview it in playback mode.
- Enable Audio
When camera type is Remote DVR, the audio is not supported.
- Name
Change the camera name
- Description
Add a short comment
(5) Remote Camera Information
- IP: Enter the IP address of the camera
- Port: The port for connection
- User ID: Enter the user id that for connecting authority
- Password: Enter the password that is for connecting authority
- Channel: Select the channel of connected camera
- Connect: Click to connect the camera when all configurations are set.