6.3 Using the Remote Playback
To use this feature, first you need to select the source of the file. In the Select Playback Mode dialog box,
choose Local Playback to open the file that is recorded in the Remote Console, and Remote Playback to
open the file that is recorded in the DVR server. When you choose Remote Playback, select RealTime
Playback if your internet bandwidth is fast and big enough, otherwise choose Download and Playback.
Click OK to proceed and Cancel to void this operation.
In the Video Playback Date/Time Selection, the number from 00 to 23 represent the time in 24-hour clock. The
numbers from 01 to 8 represent the camera number.
To Make a Selection:
1. Select the date in the calendar. Use and buttons to shift the calendar to the left or right.
2. In the table below, click on the blue block to select and open the recorded file. The blue block turns red
when it is selected. The block that appears in white doesn’t have data. You can only select one block
when you choose Download and Playback.
To Next Page
Loading...
