AVer EH6108H - Chapter 8 Using the Web Tools; Dispatch Server; To Run Dispatch Program

120
Chapter 8 Using the Web Tools
The bundled Web Tools includes Dispatch Server, Remote Backup, and Remote Setup program. To install
Web Tools, place the CD into the CD-ROM drive then click Install Web Tool.
8.1 Dispatch Server
Dispatch is designed to reduce the network traffic of the DVR server. Instead of connecting directly to the DVR
server, the client can connect to the computer that is connected to the DVR server using the Dispatch
program.
i
To have better remote live and playback performance, it’s suggested to connect DVR to Dispatch Server in LAN
environment only.
8.1.1 To Run Dispatch program
1. Make sure you are connected to the internet.
2. Click Start>Programs>DSS>Tool>Dispatch.
3. In the DVR Server section, enter the NV DVR server IP,
port, user ID and password. You can also select to
display the language you prefer.
4. Auto connect when start
Enable to automatically connect the dispatch server
when start up
5. 3GPP Service
Enable to allow user using 3GPP service to receive
video stream from Dispatch server. The Service Port
must same as RTSP port of 3GPP on DVR server.
6. In the Dispatch Service section, if you have installed
more than one network card, select the Service IP
number.
7. In the Dynamic DNS Configuration section, enter the
DNS server Name and Password. The DNS server can
be the remote storage server for sharing the DVR system
loading.
8. Click START to connect.