AVer EH6108H - To Setup Remote System Setting

122
5. Once the connecting is success, user can start to configure DVR server by clicking Setup button.
6. When connection is lost, click Reconnect to connect again.
7. To modify or delete the added DVR server, select the DVR server from listing and click Modify to change
the setting and click Delete to remove the DVR server.
8. User also can import the setting by clicking Import button. To save the setting to local hard disk, click
Export button.
8.2.2 To Setup Remote System Setting
The setting here applies to Remote DVR only. Please refer to Chapter 6.1.3.