AVer EH6108H - To Search Using the Intelligent Search

59
CHAPTER 3
3.6.5 To Search Using the Intelligent Search
1. Click on the video screen on where you want to search.
2. Click Intelligent Search. The Intelligent Search text (red) would appear at the lower left corner of the
screen.
3.
When the Intelligent Search Setting dialog box and motion detector frame appear, you may adjust the
sensitivity bar and the motion detector frame size and location. To set motion detector frame size and
location, left click and drag on the screen. Then, click
OK
to start searching. The video search would stop
at the frame that matches the condition. To keep on searching click . You may also set to search and
list all the result. Just check the
List
box. In the
Search Duration
section set the
Begin Time
and
End
Time
. Set the
Searching Interval
time that system won’t list out the same events in a period of time that
user has setup. Then, click
OK
to start searching.