AVer PTC V2 Series Quick Start Guide

7
CAM_ExpComp
Direct
8x 01 04 4E 00 00 0p 0q FF
pq: ExpComp (pq: 0x01~0x09 , Value:
-4~ +4 , Each value = 0.3EV)
CAM_BackLight
On
8x 01 04 33 02 FF
Back Light Comp ON/OFF
CAM_BackLight
Off
8x 01 04 33 03 FF
CAM_LR_Reverse
On
8x 01 04 61 02 FF
Mirror Image ON/OFF
CAM_LR_Reverse
Off
8x 01 04 61 03 FF
CAM_Memory
Reset
8x 01 04 3F 00 pp FF
pp: 0x00 To 0xFF
CAM_Memory
Set
8x 01 04 3F 01 pp FF
pp: 0x00 To 0xFF
pp: 0x5A => SmartFrame Enable
pp: 0x5B => SmartFrame Disable
pp: 0x5C => SmartFrame Trigger
pp: 0x5D => SmartShoot Enable
pp: 0x5E => SmartShoot Disable
pp: 0x5F => Trun on OSD menu
CAM_Memory
Recall
8x 01 04 3F 02 pp FF
SYS_Menu
On
8x 01 06 06 02 FF
turn on the menu screen
SYS_Menu
Off
8x 01 06 06 03 FF
Erasing menu display(turn off the menu
screen/VC-A70H)
SYS_Menu
On/Off
8x 01 06 06 10 FF
turn on/off the menu screen
SYS_Menu
Menu Enter
8x 01 7E 01 02 00 01 FF
menu enter
Pan-tiltDrive
Up
8x 01 06 01 VV WW 03 01
FF
VV: Pan speed setting 0x01 (low
speed) to 0x18 (high speed)
WW: Tilt speed setting 0x01 (low
speed) to 0x18 (high speed)
YYYY: Pan Position 8A14 to 762C
(CENTER 0000)
ZZZZ: Tilt Position 468B to E898
Pan-tiltDrive
Down
8x 01 06 01 VV WW 03 02
FF
Pan-tiltDrive
Left
8x 01 06 01 VV WW 01 03
FF
Pan-tiltDrive
Right
8x 01 06 01 VV WW 02 03
FF

AVer PTC V2 Series Specifications

General

Brand	AVer
Model	PTC V2 Series
Category	Security Camera
Language	English