37
Firmware Update
You can conduct camera firmware update through AVer’s network server or
update manually.
[Notes] Firmware cannot be updated when the selected cameras are power-off,
standby or offline.
To update camera firmware, you can:
Update automatically:
1. Make sure you have access to AVer’s network server.
2. Go to Management > Firmware Update, select Auto Update >
Select camera(s) and click Start to update.
Update manually:
1. Store the firmware file to your system.
2. Select Manual Select FW File and then click to open the firmware
file.
3. Select camera and click Start to update.
After updating, the cameras will restart. AVer PTZ Management will lose
connection with the camera. Please wait for AVer PTZ Management to reconnect
to the cameras.
To Next Page
Loading...
