Installation
1. Connect the camera to power outlet.
Power cord
Power adapter
2. Connect the camera to the
speakerphone using the included
compatible cable.
[Note]
Both speakerphone and camera port are
marked in blue.
The back cover of the speakerphone will
need to be removed to connect the
speakerphone cable.
Speakerphone
cable
3. Connect other necessary cables.
[Note]
USB and RS232 cable need to secure the
cable with attached screw.
Make sure the cable is well connected to
the connector on the camera before
securing the cable.
To Next Page
Loading...
