03/10 Rev. 5.04-04 SERVICE MANUAL Service Mechanics
64-xx – 64-xx Dispenser
25
Ribbon rewinding mandrel (type 3)
Tools
– 2.5/2 mm allen keys
– Size 7/8 socket wrenches
– Plastic hammer
Preparation for disassembling
1. Remove cap (1).
2. Remove front and rear hood.
3. Remove the ribbon motor. Hang out the
toothed belt.
4. Unscrew the contact spring (2).
4. Measure (5) and note how deep the nut
(3) and cap (4) are screwed on to the
threaded rod.
5. Remove the securing nut.
Continued on the next page.
3
4
2
5
1
To Next Page
Loading...
