03/10 Rev. 5.04-04 SERVICE MANUAL Service Mechanics
64-xx – 64-xx Dispenser
72
Locking clips for flat strap plugs
Since 4/2008, the following flat strap plugs are
fixed with locking clips (fig. right) to the
relevant board:
Board Plug at Clip
CPU Printhead cable A5387
CPU Data cable CPU - USI A5386
CPU Data cable CPU -
output stages
A5386
Output
stage
Data cable CPU -
output stages
A5386
Tools
Tweezers or flat pliers
Attaching the clip
1. Hang the clip (1) into the hole in the
connector housing (2).
2. Use the tweezers (3) to pull the clip end
over the plug.
3. Snap the clip end (4) into the hole in the
connector housing.
The plug is locked now.
1
1
2
3
4
To Next Page
Loading...
