03/13 Rev. 5.08-01 USER MANUAL Einrichten
64-xx – 64-xx dispenser
6
Only 64-xx dispenser:
9. Guide material through under the dis-
penser roller (1).
10. Pull labels off the backing paper over a
length of about 50 cm (Fig. 1).
11. Open the locking lever (press downwards,
Fig. 2) and swivel it half a revolution to the
rear.
12. Pull the drawing module (2) all the way out
(Fig. 3).
13. Guide the backing paper under the print
module to the rear (Fig. 4).
To Next Page
Loading...
