7-8 Packet Reference Manual
Use a Job Request 4 when printing in the on-demand mode with a large number of tags or labels
from a single batch. A Job Request 4 may not be accurate if tags or labels are printed in
continuous mode, because of the response time involved. A Job Request 4 is not useful in single
ticket batches (printing 1 of 1) or multiple single ticket batches.
Note: A batch has to be printing when sending the job request. Do not use this job request on
batches with incrementing fields.
Job Status Responses
Status 1 Codes Status 2 Codes
No. Description No. Description
0 No error 51 Invalid command
1 Stacker Fault 52 Invalid separator value
2 Supply problem 53 Graphic not found
4 Hot printhead 54 Format for batch not found
5 Printhead open 55 Quantity/Multiples out-of-range
6 Insufficient memory 56 Name descriptor too long
7 Ribbon problem 57 Invalid cut value
8 Field number extends off tag 58 Invalid number-of-parts
9 Field number has a bad font/bar code 59 Invalid orientation value
10 Field number contains invalid data 60 Invalid thickness value
11 Field number has a graphic missing 61 Invalid text field
12 Invalid communication channel 62 Invalid bar code file
13 Invalid file type 63 Data string too long
14 All communication channels are busy 64 Invalid data field
15 Receive overrun error 65 Row greater than stock length
16 Receive parity error 66 Row greater than format length
17 Receive framing error 67 Column greater than printhead width
18 Receive buffer full 68 Column greater than format width
21 Bad dots (bar code verifier failure) 70 Invalid label width
23 Low battery 71 Invalid increment/decrement value
24 Memory configuration packet error 72 Identifier out-of-range
73 No field to create format
74 Stop location of a line is out of range
75 Syntax error
80
Cannot use offline format for online
batch
81 Cannot queue graphic batch
Cannot store online format
83 Cannot queue online batch
84 Cannot queue online clear command
Numbers 25 through 50 are not currently in use.
To Next Page
Loading...
