09/09 Rev. 5.03-01 USER / SERVICE MANUAL Specifications
AP4.4 – AP5.4
2
Device Types, Application
AP4.4
• Monotone printing of label stock for thermal and thermotransfer processes
• Printing on different materials, e.g. cardboard or self-adhesive labels
• Processing roll and fan-folded material
• Resolution: optionally 203 or 300dpi
• Print speed up to 200mm/sec (8”/s)
• Print width up to 105mm
• Interfaces: RS-232, USBCentronics, and connection for foot switch
AP5.4
The AP5.4 is available in 3 versions, which additionally offers the following
equipment features:
• Basic
Like the AP4.4, but additionally equipped with the following: Keyboard
connection, slot for CF card, Ethernet port
The following options can be integrated:
– Reflex sensor
– I/O board
• Peripheral
Like the AP5.4 basic, but with capability to add the following extra option:
– External cutter
– External rewinder
– Internal rewinder
• Peripheral with internal winder
Like the AP5.4 peripheral with additional built-in internal rewinder. In con-
nection with an optional dispensing edge, this printer can also be used as
a dispenser.
To Next Page
Loading...
