09/09 Rev. 5.03-01 USER / SERVICE MANUAL Specifications
AP4.4 – AP5.4
8
Label Stock
Material Types Thermodirect material, thermotransfer material, synthetic ribbons: PE, PP,
PVC, PA in rolls or fan-folded.
Material Thickness Self-adhesive labels: 60- 160g/m
2
Cardboard labels: max. 240g/m
2
Material Width
Label Length
• Normal printing: 5mm up to max. print length
• Dispensing: 30-200mm
• Dispensing with optional punch sensor for short labels: 5-200mm
Gap size Gap size between the labels on the backing material:
• min.: 1.0mm
• max.: Label length-15 mm
Label Roll
• Winding Direction: Labels facing inward or outward, internal rewinder: la-
bels facing outwards
• Roll diameter:
• Core diameter: 38.1mm (1.5“), 76.2 mm (3“) oder 101.6 mm(4“); cores with
76.2 (3“) or 101.6mm (4“) can be applied with the core adapter supplied
with the printer.
• Material width: 12 to 120mm, for dispenser version: 15 to 110 mm
Printer type / Application Material width
AP4.4, AP5.4 basic, AP5.4 peripheral 15-120mm
AP5.4 with internal rewinder 15-120mm
AP5.4 dispenser 30-110mm
AP 5.4 dispenser, if a footswitch is used instead of the label
sensor to trigger the printer
15-110mm
[Tab. 4] Admissible material width of the different printer types.
Roll / Conditions Roll Ø
Label roll for normal printing operation max. 210mm
Label roll for dispensing operation (with 100mm core-Ø) max. 190 mm
Take-up roll for winding/dispenser operation max. 125mm
[Tab. 5]Diameter of material and winding roll
To Next Page
Loading...
