09/09 Rev. 5.03-01 USER / SERVICE MANUAL Specifications
AP4.4 – AP5.4
9
Thermotransfer Ribbon
Ribbon Roll • Winding Direction: Colour-side preferably rolled inwards (colour side facing
outwards can be used)
• Roll measurements:
Connections, device data
Protection class I
Mains Voltage 100-240V (AC)
Mains Frequency 50-60 Hz
Power Consumption
• Max. 250W
• In standby mode depending on the equipment 30-40W
Current Consumption max. 3.2A
Interfaces
External Ø max. 80mm
Core Ø 25mm (1”)
Width 25-114mm
Length max. 500m
Interface AP4.4 AP5.4 Details
Centronics X X
Bi-directional; conforms with
IEEE 1284; nibble mode;
connector at the printer: type C
RS-232 X X
Baud: 1200-115200, 8- bit;
suitable connection cord: 1:1
D-Sub 9 extension lead (connec-
tor-jack)
RS-422/485 O Baud: 1200-115200, 8- bit
Ethernet X
10/100 Base T with TCP/IP, LPD,
RawIP printing, DHCP, HTTPD,
FTPD, SNMP
USB slave V1.1 X X
Transmission rate 12Mbps. If the
printer is connected to a host run-
ning under Windows, the hosts
OS will search for a matching
printer driver.
Keyboard Connector X PS/2
Connector for Additio-
nal Devices
X
[Tab. 6] X=present; O=optionally available
To Next Page
Loading...
