Avery Dennison AP5.4 Gen II - Page 17

03/10 Rev. 5.05-00 USER- / SERVICE MANUAL Info-Printouts & Parameters
AP5.4 Gen II – AP5.6
17
y Printer type:
– Shows the printer type, which has been set using parameter
SERVICE FUNCTIONS > printer type (e.g. Avery 64-04)
– "USA" displayed after the printer type indicates that the USA font is loaded.
– "8DOT" displayed after the printer type indicates that the 8-Dot emulation
is loaded.
y Printer Parameter Menu
Shows the setting of the parameters in the
PRINT PARAMETERS menu.
y Printer Interface Menu
Shows the setting of the parameters in the
INTERFACE PARA menu.
y Printer system menu
Shows the setting of the parameters in the
SYSTEM PARAMETERS menu.
y Dispenser Interface
Shows the setting of the parameters in the
DP INTERFACE menu.
y Internal Options
– Default values: Shows the values which are used in case of a factory reset
(Standard or Default). See parameter
SPECIAL FUNCTION > Default Values.
– Realtime Clock: Shows the set time and date, if a realtime clock is installed.
In case of a too low battery, the line "Battery empty" is added.
– 2. com port: Shows if an additionall serial Interface is installed (not
supported).