Avery Dennison AP5.4 Gen II - Gateway Address; Port Address; Ethernet Speed; MAC Address

03/10 Rev. 5.05-00 USER- / SERVICE MANUAL Info-Printouts & Parameters
AP5.4 Gen II – AP5.6
45
Gateway address
AP5.4 AP5.6
xxx.xxx.xxx.xxx Setting range per xxx value: 0 to 255
000.000.000.000 = no gateway is used
Port address
AP5.4 AP5.6
Setting range: 1024 to 65535. Default: 9100.
Ethernet speed
AP5.4 AP5.6
Auto negotioation The communication speed is selected automatically.
10M half duplex The communication speed is set to 10 MBit/s half duplex.
10M full duplex The communication speed is set to 10 MBit/s full duplex.
100M half duplex The communication speed is set to 100 MBit/s half duplex.
100M full duplex The communication speed is set to 100 MBit/s full duplex.
MAC address
AP5.4 AP5.6
Displays the MAC address of the CPU board. This address can not be
changed in the parameter menu.
SNMP agent
AP5.4 AP5.6
¯ Function is not released yet.
SNMP password
AP5.4 AP5.6
¯ Only in production mode.
¯ Function is not released yet.