03/10 Rev. 5.05-00 USER- / SERVICE MANUAL Info-Printouts & Parameters
AP5.4 Gen II – AP5.6
46
FTP server
AP5.4 AP5.6
The File Transfer Protocol (FTP) server (RFC959) allows access to the inter-
nal RAM disk of the printer and, if available, to the memory card. The FTP
server is capable of multisession mode, without evaluating the user name
when logging in. The password must match the set password (see below).
P For further information read the user manual, topic section „Advanced Appli-
cations“, chapter „Data transmission with FTP“.
Enabled Switches the FTP server on.
Disabled Switches the FTP server off.
FTP password
AP5.4 AP5.6
¯ Parameter only appears in production mode.
Input of the FTP server password by means of a connected keyboard or the
printers operation panel. Default setting: „avery“.
Changing the password:
1. Press the Esc button. The cursor jumps to the first character.
2. Press the Cut- or Feed button until the wanted character appears.
Acknowledge by pressing the Online button.
3. Put in the next character.
4. Acknowledge the new password by pressing the Online button.
¯ If a keyboard is connected, this can be used for typing in the password.
To Next Page
Loading...
