03/10 Rev. 5.05-00 USER- / SERVICE MANUAL Info-Printouts & Parameters
AP5.4 Gen II – AP5.6
48
WEB display refr
WEB display refresh
AP5.4 AP5.6
¯ Only appears, if INTERF.PARAM > NETWORK PARAM. > Time client = „Enabled“.
Automatic updating of the web browser display. The setting determines the
time in seconds between two updates.
¯ Setting 0 = „no automatic updating“.
xx s Setting range: 0 to 20; Default setting: 5
WEB admin passw.
WEB administrator password
AP5.4 AP5.6
¯ Only in production mode.
Modifying the password for web server access as admin.
Default setting: „admin“
¯ The user name is also „admin“.
¯ If the user logs in as admin to the web server, he/she has access to all
parameters, which are not marked with the footmark „only in production
mode“.
Changing the password at the operating panel:
1. Press the Esc button. The cursor jumps to the first character.
2. Press the Cut- or Feed button until the wanted character appears.
Acknowledge by pressing the Online button.
3. Type in the next character.
4. Acknowledge the new password by pressing the Online button.
¯ Alternatively, the password can be typed in using a keyboard, or via the
web server.
WEB supervisor p.
WEB supervisor password
AP5.4 AP5.6
¯ Only in production mode.
Modifying the password for web server access as supervisor.
Default setting: „supervisor“
¯ The user name is also „supervisor“.
¯ If the user logs in as supervisor to the web server, he/she has access to
all parameters.
Changing the password at the operating panel:
To Next Page
Loading...
