Avery Dennison AP5.4 Gen II - Service Functions; Service Counter Management; Component Replacement Counters

03/10 Rev. 5.05-00 USER- / SERVICE MANUAL Info-Printouts & Parameters
AP5.4 Gen II – AP5.6
88
SERVICE FUNCTION
Service
AP5.4 AP5.6
Parameter only appears in production mode.
Increases the counter level of the "Service" counter on the "Service Status"
printout by one.
P See parameter Service Status  on page 24.
yes Increases the counter "Services" by one
no Doesn´t increase the counter
Head exchange
AP5.4 AP5.6
¯ Parameter only appears in production mode.
Increases the counter „Head number“ on the info printout „Service Status“ by
one.
P See parameter Service Status  on page 24.
yes Increases the counter "Head number" by one
no Doesn´t increase the counter
Roller exchange
AP5.4 AP5.6
¯ Parameter only appears in production mode.
Increases the counter „Roll number“ on the info printout „Service Status“ by
one.
P See parameter Service Status  on page 24.
yes Increases the counter "Roll number" by one
no Doesn´t increase the counter