Avery Dennison AP5.4 Gen II - Operation Counters

03/10 Rev. 5.05-00 USER- / SERVICE MANUAL Info-Printouts & Parameters
AP5.4 Gen II – AP5.6
97
Intern. rewinder
(Internal rewinder)
AP5.4 AP5.6
¯ „AP5.4/5.6 peripheral with internal rewinder“ only.
Applied PIC version on the internal rewinder motor output stage board.
> OPERATION DATA
Serv. operations
AP5.4 AP5.6
Shows the num+ber of service operations. The counter is increased by call-
ing the parameter
SERVICE FUNCTION > Service = yes. Maximum value: 4 billions.
Headnumber
AP5.4 AP5.6
Shows the number of printhead changes. The counter is increased by calling
the parameter
SERVICE FUNCTION > Cutter exchange = yes. Maximum value: 4 bil-
lions.
Roll number
AP5.4 AP5.6
Shows the number of exchanged print rollers. The counter is increased by
calling the parameter
SERVICE FUNCTION > Roller exchange > yes. Maximum value:
4 billions.
Cutter number
AP5.4 AP5.6
¯ Only with mounted and activated cutter.
Shows the number of exchanged cutters. The counter is increased by calling
the parameter
SERVICE FUNCTION > Cutter exchange =yes. Maximum value:
4 billions.