Avery Dennison FRESHMARX 9416 - Setting up the Freshmarx System; Setting the Date and Time

Using The Keypad 2-5
Setting up the FreshMarx System
IMPORTANT - Complete the following steps before
using the system.
To set up the system:
1. Press the FreshMarx button three times.
SELECT DATE OR TIME
2. Press the number 3 button.
SENDING PRINTER SETUP COMMAND TO
PRINTER, PLEASE WAIT.
3. Press any key to print a label.
Setting the Date and Time
To set the Date:
1. Press the FreshMarx button three times.
SELECT DATE OR TIME
2. Press the number 1 button. The display shows the
current date setting. If this is correct, press the
FreshMarx button to return to the Main Display.
To change the setting, use the numeric
buttons:
♦ Press 1 to change the month
♦ Press 2 to change the day
♦ Press 3 to add a year
♦ Press 4 to subtract a year
3. Press the FreshMarx button to save the changes
and to return to the Main Display.