Avery Dennison MONARCH 9416 XL - Online Configuration Errors

Online Configuration Errors
Error
Code
Description
251
Power up mode must be 0 (online).
252
Language selection must be 0 (English).
253
Batch separator must be 0 (off).
254
Slash zero selection must be 0 (standard zero).
255
Supply type must be 0 (black mark), 1 (die cut), or 2 (continuous/non-indexed).
256
Ribbon selection must be 0 (thermal direct) or 1 (thermal transfer).
257
Feed mode must be 0 (continuous) or 1 (on-demand).
258
Supply position must be -300 to 300 dots.
259
Contrast adjustment must be -390 to 156 dots.
260
Print adjustment (position) must be -99 to 99 dots.
261
Margin adjustment (position) must be -99 to 99 dots.
262
Speed adjustment must be 0 (default), 20 (2.0 ips), 30 (3.0 ips), 40 (4.0 ips), or 50
(5.0 ips).
263
Primary monetary symbol must be 0 (None), 1 (Dollar), 2 (Pound), 3 (Yen), 4
(Deutsche Mark), 5 (Franc), 6 (Peseta), 7 (Lira), 8 (Krona), 9 (Markka), 10 (Schilling),
11 (Rupee), 12 (Ruble), 13 (Won), 14 (Baht), 15 (Yuan), or 16 (Eurodollar).
264
Secondary symbol selection must be 0 (none) or 1 (print secondary sign).
265
Monetary decimal places must be 0 to 3.
266
Character string length in the control characters packet must be 5 (MPCL control
characters) or 7 (ENQ/IMD command character).
267
Baud rate selection must be 0 (1200), 1 (2400), 2 (4800), 3 (9600), 4 (19200), or 5
(38400). Resend the communication settings packet.
268
Word length selection must be 0 (7 bits), or 1 (8 bits). Resend the communication
settings packet.
269
Stop bits selection must be 0 (1 bit), or 1 (2 bits). Resend the communication settings
packet.
270
Parity selection must be 0 (none), 1 (odd), or 2 (even). Resend the communication
settings packet.
271
Flow control selection must be 0 (none), 1 (DTR), 2 (CTS/RTS), or 3 (XON/XOFF).
Resend the communication settings packet.
8-8 DIAGNOSTICS AND ERRORS