Avery Dennison MONARCH 9416 XL - Entering Batch Data for QR Code; QR Code Packet

Entering Batch Data for QR Code
QR Code requires certain parameters at the beginning of all batch data.
Syntax "error_cor mask# data_input, char"
error_cor Level of error correction. Some damaged bar codes may still be scannable if the error correction is
high enough. Options:
H Ultra high reliability level
Q High reliability level
M Standard level
L High density level
Note: As you increase the error correction level, the maximum number of characters (in the field)
decreases.
mask# Mask number. Undefined. Leave blank or use 0.
data_input Type of data input. Options:
A Automatic
M Manual
char Type of characters. Options:
A Alphanumeric
B Binary
K Kanji
N Numeric
Note: In binary mode, the number of characters must be represented by the 4-digit number in
decimal.
Example 1,"HM,N0123456789012345" p }
Defines the following batch data for the QR Code: The error correction level is H, which
provides very high reliability. Leave the mask number blank. The data input mode is Manual.
The type of characters are Numeric and the data is 0123456789012345.
QR Code Packet
{F,1,A,R,E,200,200,"QRCODE" p
B,1,200,V,50,50,36,0,100,2,B,0 p
{B,1,N,1 p
1,"HM,N0123456789012345" p }
A-6 SAMPLES