2-14 Loading Supplies & Printing
Loading Fan-Fold Supplies
1. Place a stack of fan-fold supplies behind the
printer, label side up.
Note: You may have to move the printer to allow
room for the supply.
2. Push the external supply guides (located on the
back of the printer) out to their widest position.
3. Feed the fan-fold labels, printing side up, into the
external supply slot on the back of the printer and
through the external supply guides.
4. Adjust the external supply guides so that they
barely touch the edge of the supply.
5. Press the cover release levers (located on each
side of the printer) towards the front of the printer
to release the cover.
External Supply
Guides
To Next Page
Loading...
