3-2 Care & Maintenance
Cleaning the Printhead
Clean the printhead whenever you notice a decline in
print quality, or after using three rolls of supply.
Note: You must turn the printer’s power off before
cleaning the printhead. If you need to clean
the printhead during a print job, you may lose
your data when you turn off the printer.
1. Turn off the printer. Press the switch on the back
of the printer to the OFF position (O).
2. Press the cover release levers towards the front of
the printer to release the cover.
3. Lift open the cover.
4. Moisten a cotton swab with isopropyl alcohol.
5. Rub the cotton swab across the printhead to
remove any build-up.
6. Allow the printhead to dry for one minute before
you close the cover and resume printing.
To Next Page
Loading...
