Factory-Installed Options
♦ Internal Ethernet Print Server supports TCP/IP (12691303)
♦ Peel mode with on-demand sensor
♦ Tear Bar
♦ Metal Cover
Ethernet Information
We offer internal and external Ethernet connectivity solutions. These
solutions make it easy to set up, manage, and monitor a printer linked to an
Ethernet connection. The print server provides multiprotocol capabilities for
users with Windows® 95/98/2000 or Windows NT®, TCP/IP, and NetWare®.
Software is available on our Web site (www.monarch.com
) to configure the
print server. It can also be configured using HP Jet Admin™ or HP Web
JetAdmin™ software.
Configuration information prints automatically if the Ethernet print server
senses a hardware error. To print configuration information on demand,
press the Test button on the side of the external Ethernet print server unit or
use the configuration utility provided for your network operating system. The
configuration label prints in MPCL format.
Note: The configuration label is best displayed using 4" wide by 6" long
labels. If the label is too small, some information may print outside
the label edges.
B-2 Operator's Handbook
To Next Page
Loading...
